ASME U-Stamp Liquid Filter Bag Housings Technical Bulletin A Over-the-Top® DesignVALVED, INDIVIDUAL HOUSINGS 2 INDIVIDUAL FILTER VESSELS Description ASME U-Stamp Liquid Filter Housings meet the requirements of Section VIII, Division 1, and provide the ideal solution for fine filtration. Filtration Systems vessels feature Over-The-Top® design. Compression of our Zero-Bypass® bag collar between the housing lid and the top of the support basket provides a positive 360-degree seal, preventing bypass of unfiltered liquid. Solids are trapped and collected in the bag, eliminating clean up of the vessel interior during bag change-out. Filter housings accommodate a variety of filter media, making them highly versatile for industrial, pharmaceutical, water, beverage, and other process applications. Individual, Valved Individual, and Multi-Housing Systems accommodate size #1 (7"dia. x 16"long) or #2 (7"dia. x 33"long) filter bags, cartridges, or strainer baskets. Vessels are T-316 stainless steel or carbon steel, 150 or 300psi, valved or non-valved. Alternate inlet and outlet connections may be ordered, allowing the vessels to be placed directly in line with existing process piping. Valved, Individual Housings allow liquid flow to be shut off at the unit, rather than at a distant source, saving time during media change-out. A Low-Profile Horizontal Outlet is a standard feature of Valved, Individual Housings. Multi-Housing Filter Systems are available with 2 to 8 modules, providing increased flow rate capacity by using multiple housings simultaneously. Valved versions have stainless steel ball valves on the inlet and outlet of each vessel. Functioning as shut-off valves, they isolate individual housings from the filtering process, allowing continuous service of the remaining housings during media removal and replacement. All Multi-Housing Systems are equipped with two inlet and two outlet connections. Alternate connection ports allow users the option of choosing any inlet and outlet site(s) to accommodate space and piping requirements. Unused ports are sealed with user-furnished blind flanges. Filtration Systems versatile, modular design provides simplified installation, equipment expansion, and header inspection and cleaning. Systems are built on a stable frame, shipped fully assembled, and require no anchor bolts for installation. Standard Features Over-The-Top Design ASME U Stamp, Section VIII, Div. 1 Available in 150psi or 300psi maximum working pressure Investment Cast Lid and Body Hinged Lid with Handle, Built-in Lid Stop, and Safety Detents Perforated T-316 S/S Support Basket with Longitudinal Taper Gauge Ports, Vent Ports, Drain Ports Buna-N O-Rings Adjustable Tripod Stand, or Frame model s-112 model s-122 toP View 1/4” NPT downstream gauge port lid handle 1/4” NPT upstream gauge port 1/4” NPT vent port siDe View 1/4” NPT vent port 1/4” NPT upstream gauge port 1/4” NPT downstream gauge port adjustable stand 3/4” NPT drain port 2” outlet flange connection 2” inlet flange connection 1/4” upstream drain port 8-5/8” O.D. a b c D e model s-122-LP-V toP View lid handle 1/4” NPT upstream gauge port 1/4” NPT vent port 1/4” NPT vent port 1/4” NPT upstream gauge port 1/4” NPT downstream gauge port adjustable stand 3/4” NPT drain port 2” outlet flange connection 1/4” upstream drain port valve handle 8-5/8” O.D. siDe View a b c D e MODELABCDEWT/LBS S-11215-1/2”10-1/2”12”22”14”110 S-12215-1/2”10-1/2”26”35-1/2”14”130 Adjustable Tripod Stand: 17” H, 12” bolt hole circle, Band: 2” wide, 8 5/8” I.D. MODELABCDEWT/LBS S-122-LP-V21-7/8”17-1/4” 22-3/4” 33-1/2”14”140 Adjustable Tripod Stand: 17” H, 12” bolt hole circle, Band: 2” wide, 8 5/8” I.D. 1/4” NPT downstream gauge port 2” inlet flange connectionmodel s-424-V 3 MULTI-HOUSING FILTER SYSTEMS model s-223-V 1/4” NPT upstream gauge port 1/4” NPT vent port lid handle front View 1/4” NPT vent port 1/4” NPT upstream gauge port 1/4” NPT downstream gauge port 3” angle outlet flange connection 1/4” upstream drain port inlet flange connection 1/4” NPT upstream gauge port 1/4” NPT vent port toP View front View lid handle 1/4” NPT downstream gauge port 3/4” NPT drain port aba D c h g f abbba c D J k siDe View toP View inlet outlet 8-5/8” O.D. outlet inlet inletinlet outletoutlet 3/4” NPT drain port 3/4” NPT drain port 1/4” NPT downstream gauge port * Flow Rates are based on water in a housing without filter media. Actual flow rates are determined by the specific filter media selected, as well as the characteristics of the application. ** For Non-Valved Systems, subtract 5". -223-V -324-V -424-V -526-V -626-V -726-V -826-V -928-V -1028-V -1128-V -1228-V 2 3 4 5 6 7 8 9 10 11 12 3 4 4 6 6 6 6 8 8 8 8 440 660 880 1100 1320 1540 1760 1980 2200 2420 2640 15.5 24.4 32.5 47.4 56.9 66.3 75.8 113.9 126.6 139.3 151.9 5 5 5 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 12 12 12 21 21 3/4 21 3/4 22 3/4 22 3/4 22 3/4 22 3/4 23 3/4 23 3/4 23 3/4 23 3/4 3 3/4 4 1/2 4 1/2 5 1/2 5 1/2 5 1/2 5 1/2 6 3/4 6 3/4 6 3/4 6 3/4 4 3/4 5 1/4 5 1/4 6 1/4 6 1/4 6 1/4 6 1/4 7 3/4 7 3/4 7 3/4 7 3/4 26 1/4 26 1/4 26 1/4 26 1/4 26 1/4 26 1/4 26 1/4 26 1/4 26 1/4 26 1/4 26 1/4 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 14 14 14 14 14 14 14 14 14 14 14 22 34 46 58 70 82 94 106 118 130 142 13 25 37 49 61 73 85 97 109 121 133 27 27 1/2 27 1/2 28 1/2 28 1/2 28 1/2 28 1/2 29 1/2 29 1/2 29 1/2 29 1/2 295 435 575 715 855 995 1135 1427 1595 1765 1930 ABC **DEFGHIJK ** MODEL NO. OF HOUSINGS 2 TO 12 MODULES AVAILABLE ALL DIMENSIONS ARE IN INCHES FLANGE SIZE (INCHES) SHIPPING WEIGHT (LBS) LIQUID VOLUME (gal/water) *MAXIMUM FLOW RATE (GPM) @ 2.2psid 4 MODEL NUMBER CODING SYSTEM STANDARD SPECIFICATIONS AND FEATURES * Flow rates are based on water in a housing without filter media. Actual flow rates are determined by the specific filter media selected, as well as the characteristics of the application. ASME U STAMP HOUSINGS• Modified Connections: Flanged, Threaded, or Sanitary • Low-Profile, Horizontal Outlets • Interior Polished Finishes, including 3A Sanitary • HALAR Fluoropolymer Lining • Epoxy Coating, interior, exterior & stand • Mesh or Micron Lined Baskets, S/S • Perforated Strainer Baskets, S/S • Cartridge Chambers, S/S • Thermal Jackets, Two-Piece, Stainless Steel • Actuated Valves, Pneumatic or Electric • SAFEsystem , Safety Apparatus Filter Enhancement • Alternate Outlet Locations • Additional Ports • Drain Valves, Vent Valves, Pressure Gauges • Assorted O-Ring Materials HALAR is a Registered Trademark of Solvay Solexis, Inc. AVAILABLE OPTIONS Interior Polished Finishes: Interior Polished Finishes for beverage, pharmaceutical, dairy, and other critical liquid process applications. Halar® Lining: HALAR Fluoropolymer Lining offers a broad range of chemical resistance properties, a seamless filtering environment, and a safe alternative to plastic housings. Safety Apparatus Filter Enhancement: SAFEsystem ® upgrade reduces employee exposure to potentially hazardous filtering processes with this unique and exclusive option. HIGH PERFORMANCE LIQUID FILTER BAGS 5 Filtration Systems vessels and filter media are designed to work together as a system, maximizing performance and results. • Efficiency Ratings up to 99.98%... provides absolute rated performance • Fully Welded Construction... eliminates solids bypass • Zero-Bypass ® Bag Collar... assures an optimum compression seal • Integrated Polymeric Support ®... provides superior mechanical strength • Ratings from 0.2 to 600 Microns... absolute or nominal ratings Ultrafit ® Welded and Accufit ® Welded Liquid Filter BagsISO 9001:2015 Certified ©2020 Mechanical Manufacturing Corp. A-05/12 W-9/20 Lower working height means easier fiLter bag change-out The Low-Profile, Horizontal Outlet is a one-piece investment casting exclusive to the Filtration Systems product line. This option lowers the working height of the filter vessel by 4" on Individual Housings and 3" on Multi-Housing Systems, eliminating the need for a ladder or platform when changing filter bags. As a result, ergonomic related injuries and accidental spills during change-out may be reduced. This self-draining outlet is optional on all stainless or carbon steel Individual Housings and Multi-Housing Systems. The "LP" upgrade is available with flanged, threaded, or sanitary connections. LOW-PROFILE CONFIGURATION OPTIONS "C" Configuration (Inlet over Outlet) The outlet of the filter vessel is on the same plane as the inlet, or in the shape of the letter "C", in a profile view. "S" Configuration (Inlet opposite Outlet) The outlet of the filter vessel is opposite the inlet, or in the shape of the letter "S", in a profile view. In this type of configuration, the filter becomes "in-line" with existing piping. Custom Outlet Configurations The direction of the "LP" outlet, relative to the inlet, can be positioned to accommodate custom piping arrangements. Note: In all Low-Profile configurations, the standard drain placement is opposite the outlet of the vessel. The location of the drain can be modified upon request. Please consult factory for other custom requirements. LOW-PROFILE, HORIZONTAL OUTLET inlet connection 32” 32” 5’9” 22-3/4” 3” 29-1/4” 3” outlet connection outlet connection inlet connection 8-5/8” O.D. 8-5/8” O.D. 10-1/2”10-1/2” Product Identification: All Filtration Systems filter vessels have a unique serial number that can be identified by our factory. Nameplates, specifying both the serial number and maximum allowable pressure and temperature ratings, are permanently affixed to all housings. Product Specifications: With over 30 years of industry expertise and proven performance, Filtration Systems offers quality products at responsible prices. We continually strive to improve our products through ongoing research and development; therefore, we reserve the right to change specifications without notice. inlet connection outlet connection 8-5/8” O.D. 22-3/4” 27” 4-3/4” 9-1/2” 14” Low-Profile, Horizontal Outlet on Multi-Housing Systems Low-Profile, Horizontal Outlet on Individual Filter Housings “C” Configuration“S” Configuration Warranty: Filtration Systems warrants our products to be free from defects in workmanship for a period of one year from the date of purchase, when used in accordance with our specific guidelines. Our only obligation and a customer’s remedy, subject to our inspection and evaluation, shall be to replace the product or refund the purchase price. Limitation of Liability: Filtration Systems shall not be held responsible or liable for any loss resulting from the resale, direct or indirect misuse, incidental or consequential damages, arising out of the use of this product. www.filtrationsystems.comNext >